+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: FS / WTB / Buying guides (https://www.superturbodiesel.com/std/forumdisplay.php?fid=8)
+--- Thread: FS: GT2359V, modified for vacuum control (/showthread.php?tid=2283)
FS: GT2359V, modified for vacuum control - ForcedInduction - 02-15-2011
GT2359V from a 2006 E320 CDI. Modified from electronic to vacuum control. A new vacuum actuator is included with the turbo. Its in great condition, there was no soot to clean from the vane mechanism and it operates very smooth. I bought it from a guy that replaced it for a failed electronic actuator.
Asking $500 with free shipping.
RE: FS: GT2359V, modified for vacuum control - yankneck696 - 02-15-2011
Well, I have no engine to use it with right now, but if it doesn't sell by tomorrow night, I might sell my testicles to buy it.
Ed
RE: FS: GT2359V, modified for vacuum control - ForcedInduction - 02-17-2011
The turbo is stock except for the removal of the electronic actuator's mount casting.
RE: FS: GT2359V, modified for vacuum control - offroadbakos - 02-21-2011
(02-17-2011, 07:58 AM)ForcedInduction The turbo is stock except for the removal of the electronic actuator's mount casting.
what hp can it reach on a OM605 turbo with MYNA 7mm IP??
RE: FS: GT2359V, modified for vacuum control - ForcedInduction - 02-21-2011
A 2359 should be good for around 225hp.
RE: FS: GT2359V, modified for vacuum control - playadude - 03-20-2011
Hey Forced,
I know you don't like my motor (91 OM603 diesel), but it was rebuilt by mercedes under warranty at 80,000 miles. I was told the rebuild's cost was $10,000. (So, maybe it could handle this modification without blowing up.)
Would your GT2359V go on my car? How much more power would I get?
Pete
Denver
RE: FS: GT2359V, modified for vacuum control - aaa - 03-20-2011
Heh, will it. There's always mods involved, you kinda have to make it work. Although I wonder how much more power a 3.5l can get (obligatory needs more fuel reminder btw).
RE: FS: GT2359V, modified for vacuum control - playadude - 03-20-2011
(03-20-2011, 04:03 PM)aaa Although I wonder how much more power a 3.5l can get (obligatory needs more fuel reminder btw).
It's got really good power now, and I baby the hell out of it. If I was getting more power and used it, I wonder if stuff would break more often.
RE: FS: GT2359V, modified for vacuum control - ForcedInduction - 03-20-2011
Yes it will fit a 603, I've seen it before.
The improvement in low end torque is where most of the power can be felt. It will also pick up a few mpg on the highway since it won't make "useless boost" like a wastegated turbo.
Quote:If I was getting more power and used it, I wonder if stuff would break more often.For a 3.5's weak rods, the greatly improved low end torque wouldn't help that bending problem...
RE: FS: GT2359V, modified for vacuum control - winmutt - 03-21-2011
* winmutt waits patiently for the fire sale.
RE: FS: GT2359V, modified for vacuum control - ForcedInduction - 03-21-2011
(03-21-2011, 09:07 AM)winmutt * winmutt waits patiently for the fire sale.
You can have it for $550, plus shipping. A handling and processing fee applies too.
RE: FS: GT2359V, modified for vacuum control - winmutt - 03-21-2011
Apparently only for me. Its a fair price, I am just a fiscal conservative.
RE: FS: GT2359V, modified for vacuum control - bmartins - 04-08-2011
Hello.
do i need a lots of changes to fit it into my w210 300td OM606?
Which is better a GT2256v or this?
RE: FS: GT2359V, modified for vacuum control - aaa - 04-08-2011
You need the same changes for both.
RE: FS: GT2359V, modified for vacuum control - racerxoffl - 05-25-2011
(02-15-2011, 08:02 PM)yankneck696 Well, I have no engine to use it with right now, but if it doesn't sell by tomorrow night, I might sell my testicles to buy it.
Ed
Well, my breeding days are hopefully done, but I still have my testes and they are big enough to buy on a whim.
It will be a nice mod to my 87 603 Wagon.
PM Sent
RE: FS: GT2359V, modified for vacuum control - bmartins - 06-15-2011
Hello.
Is it ready to fit my OM606 300TD w210?
Thnkas
RE: FS: GT2359V, modified for vacuum control - aaa - 06-15-2011
No it's not, you would have to put some effort into making it fit.
Besides, he took it apart anyways. I don't think it's for sale anymore.
RE: FS: GT2359V, modified for vacuum control - winmutt - 06-15-2011
Youll notice the seller is banned.