+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Drivetrain (https://www.superturbodiesel.com/std/forumdisplay.php?fid=9)
+--- Thread: Dose anyone have trans bell housing measurements for a 617 (/showthread.php?tid=2280)
Dose anyone have trans bell housing measurements for a 617 - cannonballSDL - 02-15-2011
im looking for raw measurements (+/- .04'') or a cad file for a adapter plate im building.
Im mating a r380 Land rover trans to a 617.
any help is greatly appreciated
RE: Dose anyone have trans bell housing measurements for a 617 - dieselboy - 02-15-2011
As in depth? Or bolt pattern? I have a spare trans and a adapter plate that I can measur out for you.
RE: Dose anyone have trans bell housing measurements for a 617 - 300D50 - 02-15-2011
What format do you want? I've got a CMM scan off of a 617, all holes, including the starter and locating lip.
RE: Dose anyone have trans bell housing measurements for a 617 - cannonballSDL - 02-15-2011
(02-15-2011, 01:11 AM)dieselboy As in depth? Or bolt pattern? I have a spare trans and a adapter plate that I can measur out for you.Yes please
(02-15-2011, 09:19 AM)300D50 What format do you want? I've got a CMM scan off of a 617, all holes, including the starter and locating lip.
my machine shop told me a TIFF file will be the best but anything you send well be workable. My email is Stefan@eurodesignmk.com
Huge thanks guys!
RE: Dose anyone have trans bell housing measurements for a 617 - 300D50 - 02-15-2011
I'll dig them out, they're in either DXF or STEP format, raw scans.
EDIT:
Just found them, I never probed the bell housing bolt pattern, just the engine pattern and starter location.
Would you still need those?
RE: Dose anyone have trans bell housing measurements for a 617 - cannonballSDL - 02-15-2011
please!
How did you scan it? and if i gave the R380 bell housing to you could you scan that?
RE: Dose anyone have trans bell housing measurements for a 617 - 300D50 - 02-15-2011
I'll throw them up on my site in a few, and drop the link in here.
EDIT:
Here you are.
I take no responsibility for any problems that might arise, but it should be good.
It's raw data, and will need to be processed before it's usable.
RE: Dose anyone have trans bell housing measurements for a 617 - cannonballSDL - 02-15-2011
Thanks man thats a great start!