[/b]NEW PRICE $350 AND COME GET IT !!!! I can include the original engine and trans for $$ 600 !! I removed the engine from the Jeep !!!






Sorry it took so long to post pics !!



Hey ALL ; 1984 300D W123 it has 142 K on it .

I am converting my 94 Jeep to an OM617 !!

I have the remainder of the DONOR CAR to part out !!

The steering column ignition key switch was broken ( column and gauge cluster sitting on passenger floor ) !!
I have the CLEAN TITLE and the Body is in Excellent NO RUST shape !! From Houston Texas AREA !! There is one small dent on Whole car ; on quarter panel near trunk lid !! Car is GOLD in color !! Almost forgot the Aluminum Rims are Immaculate ( No Pitting or Brake dust scarring )

Transmission and Torque Converter are on garage floor also ( I cut the cooler lines, so you'll have to reuse yours )

I live in S. Louisiana but can ship ( you pay shipping cost ) !! I can also accept PAYPAL ( if you pay the 2.9 % fee )

PM me your cell phone # and I can text you as many pics as you would like !! OR email ... harlow.hutchinson@cox.net

Parts are extremely CHEAP !!

If you have rust bucket body and want everything ( $350 for ALL ) you pick up !!

out of curiosity, what color is the interior?

bump for pics

That is a nice car to be parting out. This makes me sad that I don't have the room to buy the whole thing. Dang.

^^^ What he said!

I agree. Unless its got some hidden rust, that car looks better than 99% of the cars I looked at when shopping for my 300D.

(08-16-2009 03:24 AM)ForcedInduction Wrote:  I agree. Unless its got some hidden rust, that car looks better than 99% of the cars I looked at when shopping for my 300D.

NO hidden rust anywhere !! Came from the houston TX area !! I need it gone soon.....

Had a member that wanted to buy alot of parts and after I spent 3 hours pulling parts ..... he changed his mind !!!! I have the passenger door mirror and wiring back to center console .. all of center console ... fuel tank level sender... a/c control assbly.. all 4 toggle switches above a/c control ( wanted sunroof and took all ) ....all of steering column and dash gauge cluster ..... all of this is pulled and ready for shipment ( but if you wanted whole car I could put it all back ) !!

Gonna grab anything I think would be of value and send rest of it to scrap @ $150 per ton ....... someone please PM me before I have to send it to scrap !!

here is a link to more pics of the car as well as my JEEP project that the engine went into !! .... Pics of the car are scattered throughout the photostream some on page one and some on page 4 !!

http://www.flickr.com/photos/42246689@N06/

$400 you come get EVERYTHING ..... I have a clear title !!!!

(09-12-2009 12:52 PM)Hulkgreen Wrote:  

(08-16-2009 03:24 AM)ForcedInduction Wrote:  I agree. Unless its got some hidden rust, that car looks better than 99% of the cars I looked at when shopping for my 300D.

NO hidden rust anywhere !! Came from the houston TX area !! I need it gone soon.....

Had a member that wanted to buy alot of parts and after I spent 3 hours pulling parts ..... he changed his mind !!!! I have the passenger door mirror and wiring back to center console .. all of center console ... fuel tank level sender... a/c control assbly.. all 4 toggle switches above a/c control ( wanted sunroof and took all ) ....all of steering column and dash gauge cluster ..... all of this is pulled and ready for shipment ( but if you wanted whole car I could put it all back ) !!

Gonna grab anything I think would be of value and send rest of it to scrap @ $150 per ton ....... someone please PM me before I have to send it to scrap !!

here is a link to more pics of the car as well as my JEEP project that the engine went into !! .... Pics of the car are scattered throughout the photostream some on page one and some on page 4 !!

http://www.flickr.com/photos/42246689@N06/

$400 you come get EVERYTHING ..... I have a clear title !!!!

Bump for new price $350 !!! You just come get it !!!

Oh so temping. Where exactly in Louisiana are you?

(09-19-2009 03:08 PM)tantank79 Wrote:  Oh so temping. Where exactly in Louisiana are you?

South Central ..... Near Lafayette !!

I see you are in San Antonio, TX. That is less than 8 hours drive. I have a small tractor to assist with loading onto your car hauler/ utility trailer with ramps !! Maybe we can work something out to meet for a little more $$ ; but loading and unloading would be a terrible PITA without an electric winch to move the car around !!!

My friends....

IT IS ALIVE !!!

Got it started last nite using the mercedes electronics ; Unfortunately it had a fuel leak so could only let it idle for less than 10 minutes !! Of , course it was 10 pm so I must go spend my day searching down the leak !!

GOtta GO !!! I am so stoked ; since it was not much louder than a common rail cummins and that was thru the straight pipe exhaust since I have not connected it to my JEEP muffler yet which is a DYNOMAX ULTRAFLO !!

Come on guys .... someone needs some of these parts even if it is just for spares !!!

You are gonna hold off ; and 5 years from now your gonna need a window motor or something small that you could have had for cheap !!! AND : NOT BE ABLE TO FIND IT EVEN IN A JUNK YARD !!!

YOU ARE GONNA REGRET IT !!!!

If only you were in California, it's a no brainer I'd be all over that.


It is waaaaaaayyyy tooooooo niiiiccceee, to part out.





.

Ditto, if you were in CO I'd take it right now just to save the good body for a drivetrain project. (It's screaming for a Cummins 4BTA or Detroit 3-53!)

If you were interested in purchasing it, you could list it on U-ship just to see what it might cost to truck to you. I did that once with a hulk out of florida. Cost me 350 bucks to ship 1500 miles, and it had a broken tie rod, flat tires, and the engine was in the trunk.

700 bucks might still be worth it for what he's asking. There are options

(10-07-2009 09:35 AM)dropnosky Wrote:  If you were interested in purchasing it, you could list it on U-ship just to see what it might cost to truck to you. I did that once with a hulk out of florida. Cost me 350 bucks to ship 1500 miles, and it had a broken tie rod, flat tires, and the engine was in the trunk.

700 bucks might still be worth it for what he's asking. There are options

YEA !!
WHat he said !!!

And it really is waaay to nice a shape to crush it !!

SOme body needs this !!!! The tires all hold air ; but are showing signs of cracking on sidewalls .......but have alot of tread !!!

I think you should post it here.

http://www.peachparts.com/shopforum/foru...y.php?f=24


You will definitely sell it there!



.

I am not a member there and surely don't have 10 posts ...... so if you could why don;t you throw up a link in their " classifieds " and link back to this post !!!

and then any one interested can email me .....

harlow.hutchinson@cox.net or call me 337-319-8580

I just don't want to see it go to the crusher !!!

Done.

http://www.peachparts.com/shopforum/show...p?t=262814


Good luck with the sale!



.

Thank you very much !! I have a couple of very interested parties already !!!


AND Thank GOD !! I just hated the idea of sending the rust free body off to be crushed !!

I just went to the link and saw how I am getting thrown to the wolves and BASHED !!!! PLEASE LET THEM KNOW ..... THE CAR ORIGINALLY HAD AN IGNITION SWITCH PROBLEM AND THE ORIGINAL OWNER HAD IT SITTING IN A BARN FOR OVER 3 YEARS ( BEFORE I RESCUED IT ( FOR ITS MOTOR ; OF COURSE )) !!!!! THE STEERING COLUMN AND DASH CLUSTER WERE ON THE PASSENGER SEAT WHEN I RESCUED IT !!!

Thanks DeliveryValve ...... I saw where you added my ( lifesaving ) comments !! Thought someone was gonna contact me to buy the car and murder me instead !!

Depending on what the shipping rates would be, I'm interested.

The catch is that I'm up in Washington, so I may yet be out of luck.
Don't hold it on my part, if someone wants it, but please don't crush it yet!

I've been looking for a better home for my manual trans and the rebuilt 617 turbo out of my parts car, rather than putting them in the slowly dying 300sd I'm driving.

did you ever get rid of this car?

(03-11-2010 04:42 AM)constantproject Wrote:  did you ever get rid of this car?

No !!

I still have EVERYTHING !! I can even get you the original motor and trans for $$ 600 TOTAL FOR EVERYTHING !!

I have not been able to bring myself to crush it !!! CALL ME ....... 337-319-8580 OR EMAIL harlow.hutchinson@cox.net

I NEED IT OUT OF MY YARD !!

Would you sell only the engine? Let me know.. I'm in California so I would need to figure out shipping and stuff...

1983 300D Silver/Black - Planning my mods...
2007 Chevy 2500HD Duramax Diesel with about 400rwhp on the current tune

the original motor and trans? didn't you put that in a jeep?

you should fire that stuff back in the car if you have it and sell a running driving car.

(04-26-2010 07:36 PM)capflya Wrote:  Would you sell only the engine? Let me know.. I'm in California so I would need to figure out shipping and stuff...

You figure out sensible shipping and I would consider it !! PM me for a price of just the motor without the car !!

---

(04-26-2010 08:35 PM)dropnosky Wrote:  the original motor and trans? didn't you put that in a jeep?

you should fire that stuff back in the car if you have it and sell a running driving car.

YES !! I pulled it out of the jeep and unfortunately , the car has a ignition switch in the column problem ; and when I bought the car the steering column was sitting in the passenger seat !!! I don't know how to repair this , so it is not gonna leave my yard as a driving car !!

---

I could set the motor and trans back into the car and ship the whole car !!

hmm... Still have this?

How much for the center consul wood, steering gearbox, and rear pass window motor? and drivers seat..