need to lower it 3in. in the freont and 2 in the back, and i cant find springs that lower it that much so how many coils do i need to cut to drop it that much?

One full coil per inch give or take in the front. I would just start with 3 in front and 2 in rear and see where it goes?

(08-12-2010 12:51 PM)winmutt Wrote:  One full coil per inch give or take in the front. I would just start with 3 in front and 2 in rear and see where it goes?

alright thanks

If i haven't already cut the coils I would advise to cut one half to one coil at a time since you cant put a coil back on.

I started with 1.5 coils the first time with my w123, then cut another half off. Now I can take the fronts in and out without a spring compressor!

(08-13-2010 01:18 PM)Captain America Wrote:  I started with 1.5 coils the first time with my w123, then cut another half off. Now I can take the fronts in and out without a spring compressor!

...don't hit any bumps...

(08-13-2010 01:39 PM)GREASY_BEAST Wrote:  

(08-13-2010 01:18 PM)Captain America Wrote:  I started with 1.5 coils the first time with my w123, then cut another half off. Now I can take the fronts in and out without a spring compressor!

...don't hit any bumps...

I take em at full speed!